RAM plays a crucial role in the performance of a Windows computer. If a computer is experiencing slowness or cannot efficiently handle demanding tasks, the RAM may need to be expanded. This post will explain three key steps to expand the RAM memory in a computer using Windows. Undoubtedly, this allows you to improve its performance and responsiveness.
How to expand the RAM memory of a Windows computer?
RAM memory compatibility and capacity
Before starting the RAM expansion process, it is important to make sure that you have new memory that is fully compatible with your computer. You will also need to verify that it has the capacity you need:
- Compatibility: the compatibility of the RAM memory with the computer must be checked. With this in mind, it is necessary to consult the manufacturer’s specifications or use online tools. It is key to be certain of the type of memory. For example, DDR3 or DDR4. These are the modes that can be used in a computer. It is also necessary to know if it has additional slots available to install it.
- Required capacity: the required RAM capacity must be determined. It is important to determine the user’s needs. If you use demanding applications such as design or editing programs, you may need a larger memory capacity in addition to the type of tasks you will execute and the limit your device can tolerate.
Proceed with installation of the new RAM
First, you need to confirm the type of memory the computer is compatible with. In addition to the maximum capacity, it can tolerate. Finally, it is time to proceed with the installation of the new RAM.
- Turn off the PC and disconnect it: Before installing the RAM memory, make sure to turn off the computer and disconnect it from the power supply. This ensures safety during the installation process.
- Access the memory modules: open the computer case and locate the existing RAM modules. Additional slots may be available. If so, you will have the option to add new modules without replacing the existing ones.
- Install RAM: Carefully remove the existing RAM modules, if necessary. Now place the new modules into the empty slots. It is key to make sure to properly align the notches on the memory connector and press gently until it clicks into place.
- Reassemble the PC: put the PC case back as it was before. Then you must verify that it has been well-adjusted. Finally, connect the computer to the power supply and turn it on.
RAM configuration and verification
After installing the new RAM, it’s important to configure it correctly and verify its operation. To do this, you should perform the following actions:
- RAM recognition: Usually the Windows operating system will automatically recognize the new RAM. However, it may be that if the system does not show the total capacity. Then you have to make a check using the Task Manager.
- RAM configuration in the BIOS: In some cases, it may be necessary to access the BIOS settings. This is to enable full detection of the new RAM memory. This will require a reboot of the PC. Then, during the boot process, press the key indicated on the screen to enter the BIOS. Once there, look for the option that relates to RAM memory configuration and ensure that it is enabled.
- Performance tests: After configuring the RAM correctly, you should perform performance tests. This is to verify that the computer is using the full capacity of its new memory. Demanding applications should be run. Or perform intensive tasks to make sure that the PC’s performance has really improved.
In conclusion, expanding the RAM memory in a Windows PC is an excellent way to improve its performance and responsiveness. By following the above steps, you will be able to select the right RAM memory.
It is worth reiterating that it is very important to conduct a thorough investigation. In addition to following the manufacturer’s instructions. It is always good to take all precautions when handling the internal components of the computer. This will ensure that the component will work optimally.
